AMBCO Electronics - From: 2500 PKG To: 2500 W/P - Industrial Audiometer Printer & Oto Chek

AUTOMATIC, SEMIAUTOMATIC, MANUAL TESTS

PRINT AND STORE TESTS AUTOMATICALLY

INTERNAL MEMORY STORES UP TO 260 TESTS

COMPUTER COMPATIBLE

LARGE CHARACTER LCD DISPLAY

MONITOR TEST CONDITIONS IN PROCESS

INPUT SOCIAL SECURITY NUMBER FOR ID

LARGE PRINT OUT RESULTS

CALIBRATION DATE, TEST DATE, CALIBRATION DUE DATE ON REPORT

FAST PRINT (Less than 20 seconds depending on printer)

VISUAL AND AUDIBLE ALARMS

PAUSE, RESUME FOR OPERATOR CONTROL

MEETS OR EXCEEDS A.N.S.I. S3.6-1989, O.S.H.A. REQUIREMENTS

TEST FREQUENCIES: Accuracy better than 1 percent AUTOMATIC: 500, 1000, 2000, 3000, 4000, 6000, 8000 (with validity check at 1000 Hz) SEMIAUTOMATIC & MANUAL MODES: 250. 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, 8000 (Hz)

TOTAL HARMONIC DISTORTION: Less than 3 percent , typical 1 percent

HEARING LEVEL RANGE: 0 to 95dB in 5dB increments except at 125Hz to 75dB and 250 and 8000 Hz to 85dB. Accuracy +/- 1dB

DATA OUTPUT: RS-232 9600 baud, 8 bits, no parity, DTR for printer/computer ID

STORAGE CAPACITY: Up to 260 Audiograms

PRINT TIME: Typically less than 20 seconds (printer dependent)

EARPHONES: TDH-39, 10 Ohm

DISPLAY: .375 high, 2 line by 16 characters, backlight LCD

POWER SUPPLY: 107-127 VAC 60 Hz, 10 Watts. UL Approved (optional 220 VAC 50/60 Hz available)

CASE: Impact resistant A.B.S. plastic, W 10 inches x L 8 inches x H 4.2 inches . Total audiometer weight 4.0 Ibs.

WARRANTY: 5 years on base system

The Ambco 2500 microprocessor controlled audiometer utilizes pure tone air conduction and offers selection of automatic, semi-automatic and manual testing protocols with internal test storage memory (up to 260 tests). This audiometer is recommended for industrial and occupational health medical practices.
Includes audiometer, headset, response push button, cord, ac adapter and case.
Ambco 2500 Audiometer Features
Stores tests automatically with optional printer
Large character LCD display
Monitor test conditions in process
Input patient ID #
Calibration date, test date, calibration due date on report
Visual and audible alarms
Pause, resume for operator control
Ambco 2500 Audiometer Specifications
Meets or exceeds A.N.S.I. S3.6-1989, O.S.H.A. requirements
Test frequencies: Accuracy better than 1% automatic: 500, 1000, 2000, 3000, 4000, 6000 and 8000 (with validity check at 1000 Hz) semi-automatic and manual and manual modes: 250. 500, 750, 1000, 1500, 2000, 3000, 4000, 6000 and 8000 (Hz)
Total harmonic distortion: Less than 3%, typical 1%
Hearing level range: 0 to 95dB in 5dB increments except at 125Hz to 75dB and 250 and 8000 Hz to 85dB. Accuracy +/- 1dB
Data output: RS-232 9600 baud, 8 bits, no parity, DTR for printer/computer ID
Optional print time: Typically less than 20 seconds (printer dependent) Earphones: TDH-39, 10 Ohm
Display: .375 high, 2 line by 16 characters, backlight LCD
Power supply: 107-127 VAC 60 Hz, 10 Watts. UL Approved (optional 220 VAC 50/60 Hz available)
Case: Impact resistant A.B.S. plastic, W 10\" x L 8\" x H 4.2\". Total audiometer weight 4.0 pounds.
Ambco 2500 Audiometer Options:
Ambco 2500P System includes printer, prints and stores tests automatically with large printout of results. OSHA Approved - ANSI 3.6 - 1989.
Ambco 2500TP System includes printer and OTO-CHEK bio-simulator utilized for calibration.